User Guide

RH-48
Troubleshooting - RF CCS Technical Documentation
Page 32 ©2003 Nokia Corporation Confidential Issue 1 11/2003
Use the following steps to manually tune the VCTCXO:
1Open the Phone Control dialog box.
Figure 22: Phone Control dialog box for VCTCXO troubleshooting
2 Click the LOCAL button in the Phone State area to put the phone into Local
Mode.
3 Select the following values on the RF Main Mode dialog box:
• Band = Cell (CDMA)
• Channel = 384
• Mode = Rx/Tx
Figure 23: RF Main Mode dialog box for VCTCXO troubleshooting
4 Do not use CDMA control to turn on Rho.
5Open the BB General I/O dialog box to set the CW signal.