User Guide

RH-48
Troubleshooting - RF CCS Technical Documentation
Page 24 ©2003 Nokia Corporation Confidential Issue 1 11/2003
Switching the Gain
Use the following steps if the receiver is not working properly and you need to switch the
Rx gain state.
1Open the Phone Control dialog box.
Figure 14: Phone Control dialog box for switching the Rx gain state
2 Click the LOCAL button in the Phone State area to put the phone into Local
Mode.
3 Select the following values on the RF Main Mode dialog box:
• Band = Cell (CDMA)
• Channel = 384
• Mode = Rx
Figure 15: RF Main Mode dialog box for switching the Rx gain state