User Guide

RH-48
Troubleshooting - RF CCS Technical Documentation
Page 20 ©2003 Nokia Corporation Confidential Issue 1 11/2003
2Open the Phone Control dialog box..
Figure 11: Phone Control dialog box for Rx IF troubleshooting
3 Click the LOCAL button in the Phone State area to put the phone into Local
Mode.
4 Select the following values on the RF Main Mode dialog box:
• Band = Cell (CDMA)
• Channel = 384
• Mode = Rx
Figure 12: RF Main Mode dialog box for Rx IF troubleshooting
5 Click the Set button.
Note: Be sure that the “RF Main Mode set successfully...” message appears in the status bar.