Customer Care Services Technical Documentation SERVICE MANUAL [Issue 1 NMP Part No. 0275578] [Issue 2 NMP Part No. 0275684] [Issue 3 NMP Part No. 0275731] [Issue 4 NMP Part No. 0276061] TME-3 GSM Connectivity Terminal -Nokia 30Company Confidential Issue 4 11/2003 Copyright 2002, 2003 Nokia Corporation.
Customer Care Services Technical Documentation Amendment Record Sheet Amend ment No Issue 2 Date Inserted By 04/2002 OJuntunen 11/2002 OJuntunen Comments Front section p.1&2 updated General information: pp,1&2, 5 to 7, 1o to 12 updated System module: pp 1, 5,12, 19, 29 to 40 updated Variants: list on p. 4 updated Service Software: all updated , 44 pages Service Tools: all updated, 24 pages Accessories:XRM-1 and ACW-5 updated, pp. 1-8 Issue 3 10/2003 OJ/ Front section pp.
Customer Care Services Technical Documentation Service Manual Structure General Information Modules Variants Service Software Instructions Service Tools Disassembly / Troubleshooting Accessories Tuning. Flashing and Final Testing Instructions Schematic Diagrams Issue 4 11/2003 Copyright 2002, 2003 Nokia Corporation.
Customer Care Services Technical Documentation IMPORTANT This document is intended for use by qualified service personnel only. Company Policy Our policy is of continuous development; details of all technical modifications will be included with service bulletins. While every endeavour has been made to ensure the accuracy of this document, some errors may exist. If any errors are found by the reader, NOKIA MOBILE PHONES Ltd should be notified in writing.
Customer Care Services Technical Documentation Warnings and Cautions Please refer to the phone's user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following: Warnings: 1. CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI-SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION.
Customer Care Services Technical Documentation ESD Protection Nokia requires that phone repair places have sufficient ESD protection (against static electricity) when servicing cellular phones. A cellular phone, which is ready for use, can be handled normally without ESD protection. The SIM card and battery can be replaced in normal conditions of use. To replace the color cover ESD protection must be applied, except for the phone covers which can be replaced by the customer.
