User Guide

CCS Technical Documentation Service Tools

TME-3

Product Code:

MJF-21 Docking Station Adapter: 0770374

Figure 3: View of MJF-21

MJF-21 & JBV-1 setup

1. Attach the protection key PKD-1 to parallel port one (25-pin female D-connector) of

the PC. When connecting the PKD-1 to the parallel port be sure that you insert the PC

end of the PKD-1 to the PC (male side). If you use a printer on parallel port one, place the

PKD-1 between the PC and your printer cable.

2. Connect the printer cable and D9-D9 cable, AXS-4 to the flash prommer, FPS-8.

3. Attach the docking station adadpter, MJF-21, to the docking station, JBV-1.

4. Connect modular cable, XCS-4, from the front panel of FPS-8 to the docking station,

JBV-1.

5. Connect power cable PCS-1, from the front panel of the FPS-8 (4V) to the connector

of JBV-1.

6. Install the TME-3/4 to the docking station adapter, MJF-21.

7. Connect power supply ACF-8 to the FPS-8.

8. Start Phoenix and follow the flashing instructions.