User Guide

TME-3 Company confidential

Service Software Instructions CCS Technical Documentation

TME-3 Service Software Installation procedure

• Check that a Dongle is attached to the parallel port of your computer.

• Download the latest installation package (e.g.

phoenix_service_sw_a3_03_83_005.exe) to your computer (e.g.:\TEMP)

• Close all other programs

• Install Phoenix by executing the Phoenix installation package and follow the

instructions on the screen.

• Download the latest release (e.g. TME-3_03_83_010.exe). Please contact

your regional After Market Service point for information on where to download

the latest release.

• Run the application file (e.g. TME-3_03_83_010.exe) and follow instructions

on the screen

• Administrator rights may be required to be able to install Phoenix depending

on the Operating System

• If the dongle driver is installed or updated, you need to reboot your PC before

the installation can continue.

• If uninstalling or rebooting is needed at any point, you will be prompted by the

install Shield program.