User Guide

PAMS Technical Documentation Tuning, Flashing and Final Testing Instruc-
TME-3
Issue 3 10/03 Nokia Corporation. Page 19
- Open M2M System Connector Testing (pins 14,15,17,18)
- Press Reset and Read button in Counters field.
- Mark up Enable counters automatic reading in 7s.
- Check that Data link Input LA and Data link Output LA value is increased every 7 sec-
onds.
- Wait three counting cycles.
If tested TME-3 have good results in RF and M2M Connector finaltest it can return to
customer.