User Guide

TME-3
Tuning, Flashing and Final Testing Instructions PAMS Technical Documentation
Page 12 Nokia Corporation. Issue 3 10/03
RX calibration, step1: Channel select filter
Must be done before other RX calibrations. Extra equipment not needed
•Maintenance => Tuning => Rx Channel select filter calibration
Figure 7: Rx channel select filter calibration window
• •Press "AutoTune" (Manual tuning not available on AMS version of Phoenix)
• •Tuning values must be 0…31
• •Stop => Save values to phone => Yes
• •67kHz test signal on TXC-line (from UEM to HAGAR) during calibration
• •Single calibration for both bands