User Guide

ManualsBrandsNokia ManualsCell Phone2650

Nokia Customer Care

RH-53/54

5-Service Tools

Summary of content (12 pages)

PAGE 3
RH-53/54 5-Service Tools Nokia Customer Care Table of Contents Page No Custom Service Tools ........................................................................................ 5 Standard service tools ....................................................................................... 7 Service Cables ................................................................................................ 10 DA-27 Working Instruction .........................................................................
PAGE 5
RH-53/54 5-Service Tools Nokia Customer Care Custom Service Tools Product DA-27 Service Tool Product Code Photo Description Info Docking Station Adapter 0780352 The Docking Station Adapter, together with a Docking Station, is used for analysis of Mbus, Fbus, RF, and audio connections.
PAGE 6
RH-53/54 Nokia Customer Care Product 6 5-Service Tools Service Tool Product Code Photo Description Info SF-33 POS Flash Adapter 0770857 The flash adapter allows FBUS/MBUS connections for flashing. Pack of test 10 test pins to be used with SF-33 and DA-27, code 0780398 ST-12 Rework stencil 0780384 Front End Module (FEM) RJ-51 Rework Jig 0780417 To be used with ST12.! COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
PAGE 7
RH-53/54 5-Service Tools Nokia Customer Care ■ Standard service tools Product Service Tool Product Code Photo Description Info ACF-8 Universal Power Supply 0680032 ACF-8 is used to power FPS-8 and FLS-4S. ACF8 has 6 Vdc and 2.1A output. FLS-4S POS Flash Adapter 0080543 (Americas) 0080542 (APAC) 0080541 (Europe/ Africa) The Point of Sale (POS) flash is a low-cost software upgrade tool. This requires the XCS-1 cable and ACP-8U for operation.
PAGE 8
RH-53/54 Nokia Customer Care Product PKD-1 5-Service Tools Service Tool SW Security Device Product Code Photo 0750018 Description Info SW security device PKD-1 is hardware device that, when connected to the parallel (LPT) port of the PC, enables the use of the service software. Without the dongle present, it is not possible to use the service software. Printers or other peripheral devices can be connected to the PC through the dongle, if needed.
PAGE 9
RH-53/54 5-Service Tools Product CA-5S Nokia Customer Care Service Tool Printing Cable Product Code Photo 0730283 Standard toolkit Description Info The DC cable CA-5S to be used with the JVB-1 docking station. Content: -Nokia opening tool SRT-6 Nokia No. 0770431 -Tonichi torque driver Nokia No.
PAGE 10
RH-53/54 Nokia Customer Care 5-Service Tools ■ Service Cables Product Service Tool Product Code Photo Description Info AXS-4 Service Cable 0730090 The AXS-4 D9-D9 service cable is used to connect two 9-pin connectors (e.g., between PC and FPS-8). AXS-4 length is 2 meters. DAU-9S MBUS Cable 0730108 The MBUS cable DAU-9S has a modular connector and is used between PC serial port and, for example, the MJ-36. FLC-2 DC Cable 0730185 FLC-2 is used to supply a controlled operating voltage.
PAGE 11
RH-53/54 5-Service Tools Product Nokia Customer Care Service Tool Product Code Photo Description Info XCS-1 Service Cable 0730218 The XCS-1 Service Cable is used to connect FLS-4S to SF-33. XCS-4 Modular Cable 0730178 XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes. XRF-1 RF Test Cable 0730085 RF cable XRF-1 is used to connect e.g. Module Jig MJ-36 to RF measurement equipment.
PAGE 12
RH-53/54 Nokia Customer Care 5-Service Tools DA-27 Working Instruction Working instructions for DA-27. Table 1: Insert the DA-27 like a battery, start at the battery connector side. First press the phone as shown in figure 1, then push down the phone and release the unit. First move the phone as shown in figure 1, then lift the phone carefully. Now remove the phone from DA-27. 12 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.