Nokia Customer Care 4-Service Tools ISSUE 1 09/2004 Copyright © 2004 Nokia Corporation.
RH-59/60 Nokia Customer Care 4-Service Tools [This page left intentionally blank] 2 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
RH-59/60 4-Service Tools Nokia Customer Care Table of Contents Page No Service Tools....................................................................................................... 5 Standard service tools ....................................................................................... 7 Service cables ................................................................................................... 9 ISSUE 1 09/2004 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
RH-59/60 Nokia Customer Care 4-Service Tools [This page left intentionally blank] 4 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
RH-59/60 4-Service Tools Nokia Customer Care Service Tools Product Service Tool Product Code Photo Description Info DA-35 Docking Station Adapter 0780336 The Docking Station Adapter, together with a Docking Station, is used for analysis of Mbus, Fbus, RF, and audio connections. SS-32 Module Jig Adaptor 0780337 Functions with Module Jig MJ-15 MJ-15 Module Jig 0770739 This jig allows phone PWB-level service and troubleshooting.
RH-59/60 Nokia Customer Care Product 6 4-Service Tools Service Tool Product Code Photo Description Info SA-77 RF Galvanic Adaptor 0780450 RH-59/60 specific tool to do fine tuning on phones after you disassemble only the battery cover and antenna. SF-10 POS Flash Adapter 0770748 The flash adapter allows FBUS/MBUS connections for flashing. MJS-54 LGA Rework Jig 0770349 LGA Rework Jig for PA (use with ST-10).
RH-59/60 4-Service Tools Nokia Customer Care ■ Standard service tools Product Service Tool Product Code Photo Description Info ACF-8 Universal Power Supply 0680032 ACF-8 is used to power FPS-8 and FLS-4S. ACF-8 has 6 Vdc and 2.1A output. FLS-4S POS Flash Adapter 0080543 (Americas) 0080542 (APAC) 0080541 (Europe/ Africa) The Point of Sale (POS) flash is a lowcost software upgrade tool. This requires the XCS-1 cable and ACP-8U for operation.
RH-59/60 Nokia Customer Care Product PKD-1 4-Service Tools Service Tool SW Security Device Product Code Photo 0750018 Description Info SW security device PKD-1 is hardware device that, when connected to the parallel (LPT) port of the PC, enables the use of the service software. Without the dongle present, it is not possible to use the service software. Printers or other peripheral devices can be connected to the PC through the dongle, if needed.
RH-59/60 4-Service Tools Nokia Customer Care ■ Service cables Product Service Tool Product Code Photo Description Info DAU-9S MBUS Cable 0730108 The MBUS cable DAU-9S has a modular connector and is used between PC serial port and, for example, the MJS37. FLC-2 DC Cable 0730185 FLC-2 is used to supply a controlled operating voltage. PCS-1 Power Cable 0730012 The Power Cable PCS-1 is used to connect the service tools (JBV-1, MJS57) to an external power supply.
RH-59/60 Nokia Customer Care Product 4-Service Tools Service Tool Product Code Photo Description Info XCS-1 Service Cable 0730218 The XCS-1 Service Cable is used to connect FLS-4 to FLA-23. XCS-4 Modular Cable 0730178 XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes. XRF-1 RF Cable 0730085 RF cable to N to SMA connector to interconnect the GSM test equipment to MJ-15, SA41 and SA-77.