User Guide

ISSUE 1 09/2004 COMPANY CONFIDENTIAL 75

RH-59/60

Nokia Customer Care

RH-59 Manual Alignment with Phoenix

In Phoenix, select connection Fbus and Product Gemini. If you power up the board before se-

lecting Fbus, it works without any error messages. Use the module jig or other device for RF

and Bus connection. Attenuation of the probe alone is 0.5 dB for 900 MHz and 1dB for

1800MHz.

Use CDM55 or other suitable device. Default channels are

37 for GSM900

700 for GSM1800

The alignments must be performed in the order shown to give reliable results.

The way to save data to the phone and to load data from the phone is made different in the

various tunings. Always look what is shown in the windows regarding these issues and act ac-

cordingly.

To vary a selected parameter you can use + and – key or in some cases directly type the new

value. + and – steps the value for every press. Repeat function seems not to work. In I/Q you

can use the side arrows.

■ RX calibration

Select Maintenance, Tuning, RX Calibration

Select Band: GSM 900

Select Automatic and follow the promts

The result should be like the shown: