User Guide

After Sales
Technical Documentation
TESLA Service Software User Guide
THA–4S
Page 32
Original, 12/95
Subscriber ( NAM ) Number
This can be used to program all the Subscriber Data and Common NAM
Data information into a phone. This can also be programmed through the
phone’s keypad. A customisation feature is also available through File
menu. This allows the user to set up common system data / default
settings for any cellular operator and then recall them in this menu. It is
primarily aimed as a time saving feature for dealers.
CAUTION: If you wish to only view and not change the NAM
information, press Esc to exit the screen.
Either NAM in the phone can be read from / written to by selecting either
1or 2. When a selection is made all the NAM information displayed on the
PC is updated. Basic information displayed next to 1 and 2 is operator
name (if the phone has been programmed using the customisation
feature) and Subscriber Number.
In the example Figure above ( taken from a THA–4 Series Phone ), this is
ESN Displayed 156/02062973
NAM
( * ) 1 – Customised – 1111111111
( ) 2
From this example it can be seen that NAM 1 has been programmed.
The ESN of the phone is also clearly displayed.
Dealers are strongly advised to use the customisation feature. For any
operator they could store, as the default setting, the following parameters: