User Guide

RM-4/RM-5
CCS Technical Documentation Troubleshooting Instructions
46 COMPANY CONFIDENTIAL ISSUE 1 02/2004
Copyright © 2003 Nokia. All Rights Reserved.
Figure 28: TX power level tuning window 2
1 Select the modulation 1, 0 or random in Tx Data Type. Select random if a GSM
tester is used. Then it can synchronise to the burst.
2 Select Tx PA Mode High
3 Tune the highlighted values to the wanted power (Use average burst power)
4 Tune base level to –28dBm (Close to lowest level CMD55 can keep synchronisa-
tion)
5 Calculate coefficients