User Guide

ManualsBrandsNokia ManualsCell Phone2300

ISSUE 1 02/2004 COMPANY CONFIDENTIAL 1

Customer Care Solutions

Technical Documentation

Service tools

Summary of content (10 pages)

PAGE 3
RM-4/RM-5 Service Tools CCS Technical Documentation Table of Contents Page No Service Tools ................................................................................................................. 5 Custom service tools...................................................................................................... 5 Standard service tools ................................................................................................. 6 Service Cables ......................................
PAGE 5
RM-4/RM-5 Service Tools CCS Technical Documentation Service Tools Custom service tools Product Service Tool Product Code Photo Description Info DA-10 Docking Station Adapter 0770749 The Docking Station Adapter, together with a Docking Station, is used for analysis of Mbus, Fbus, RF, and audio connections. MJ-15 Module Jig 0770739 This jig allows phone PWB-level service and troubleshooting. Components must be protected against overvoltage and over-current.
PAGE 6
RM-4/RM-5 CCS Technical Documentation ST-10 Rework stencil for PA Service Tools 0770741 Standard service tools Product 6 Service Tool Product Code Photo Description Info ACF-8 Universal Power Supply 0680032 ACF-8 is used to power FPS-8 and FLS4S. ACF-8 has 6 Vdc and 2.1A output. FLS-4S POS Flash Adapter 0080543 (Americas) 0080542 (APAC) 0080541 (Europe/ Africa) The Point of Sale (POS) flash is a lowcost software upgrade tool. This requires the XCS-1 cable and ACP8U for operation.
PAGE 7
RM-4/RM-5 Service Tools CCS Technical Documentation JBV-1 Docking Station 0770298 The Docking Station and the Docking Station Adapter are needed for Mbus, Fbus, RF, and audio connections. This setup allows connection between flash prommers. When the audio box is connected, it has to be connected to the phone’s audio connector. The Docking Station can be powered by FPS-8 or external power supply.
PAGE 8
RM-4/RM-5 CCS Technical Documentation Service Tools Service Cables Product 8 Service Tool Product Code Photo Description Info DAU-9S MBUS Cable 0730108 The MBUS cable DAU-9S has a modular connector and is used between PC serial port and, for example, the MJS-37. FLC-2 DC Cable 0730185 FLC-2 is used to supply a controlled operating voltage. PCS-1 Power Cable 0730012 The Power Cable PCS-1 is used to connect the service tools (JBV-1, MJS-57) to an external power supply.
PAGE 9
RM-4/RM-5 Service Tools CCS Technical Documentation XCS-1 Service Cable 0730218 XCS-4 Modular Cable 0730178 ISSUE 1 02/2004 The XCS-1 Service Cable is used to connect FLS-4 to FLA-23. View of XCS-4 COMPANY CONFIDENTIAL Copyright © 2003 Nokia. All Rights Reserved. XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes.