User Guide

RM-4/RM-5

Service Software Instructions CCS Technical Documentation

ISSUE 1 02/2004 COMPANY CONFIDENTIAL 7

If uninstalling or rebooting is needed at any point, you will be prompted by the Install Shield

program.

If at any point during installation you get this message, the dongle is not found and installation

can not continue.

Possible reasons may be defective or too old PKD-1Dongle (five digit serial number Dongle

when used with FPS-8 Prommer) or that the FLS-4S POS Flash Dongle is defective or power

to it is not supplied by external charger.

Check the COM /parallel ports used first! After correcting the problem, installation can be re-

started.