User Guide

RM-4/RM-5

CCS Technical Documentation Service Software Instructions

40 COMPANY CONFIDENTIAL ISSUE 1 02/2004

After a successful installation, choose “Finish” to complete.

YOU CAN NOW CONNECT THE USB CABLE / JBV-1 TO YOUR COMPUTER!

Connect power to JBV-1 (11-16V DC) from an external power supply, then connect the USB

Cable between JBV-1 USB connector and PC.

The next step is to install or update the JBV-1 USB drivers which are delivered with the JBV-1

SW installation package. They can be found in folder:

C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver

If there is no previously installed JBV-1 Firmware update package installed on your computer,

Windows will detect the connected USB cable and drivers for the new HW. You will be prompt-

ed about this, please follow the instructions and allow Windows to search and install the best

Drivers available.

If there is a previously installed JBV-1 Firmware update package (v 17 or older) on your com-

puter, please update the JBV-1 USB Driver. Please see the readme.txt file under C:\Program

Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver for instructions on how to update the

JBV-1 USB Driver.

After you have installed or updated the JBV-1 USB driver, the actual JBV-1 SW update can

begin.

Go to folder C:\Program Files\Nokia\JBV-1 Firmware Update\JBV-1 Firmware Update and

start JBV-1 Update SW by double clicking fwup.exe.

JBV-1 Firmware update starts and shows the current status of the JBV-1 connected.

If the firmware version read from your JBV-1 is not the latest one available (v. 17 or older) , it

needs to be updated to version 18 by choosing “Update Firmware”.