User Guide

RH-17
Service Tools CCS Technical Documentation
Page 6 Nokia Corporation Confidential Issue 1 04/2003
RJ-13 Rework Jig 0770574 This tool serves as a
mechanical PWB holder
for desoldering and sol-
dering of components.
This tool is NOT intended
to serve as a test jig.
MJF-28 Docking Station Adapter 0770484 This device works in con-
junction with JBV-1
Docking Station and the
FPS-8 Prommer Box to
allow calibration, tuning,
and/or software flashing
of the handset. It sup-
ports the LYNX battery
interface, which does not
require BTEMP. It also has
a built-in R-UIM card
reader. The MJF device is
used in AMS repair cent-
ers for flashing and tun-
ing. It is also useful in
R&D labs during product
development and True
Testing.
CA-5S DC Service Cable 0730283 CA-5S is used for EM
calibration with the
JBV-1. The cable replaces
the SCB-3 DC Cable
(0730114).
FLA-44 Flash Loading Adapter 0770483 This accessory replaces
the phone battery and
allows the service SW to
communicate with the
handset for flashing and
other POS functions using
the FLS-4S device setup.
The device can also be
powered by an external P/
S (3.9-4.5 VDC...DO NOT
exceed 4.5.VDC). Pins
(0770450) are replaceable
as long as they do not get
stuck inside the PIN
tower.
Photo Code Service Tool Code Description Info