User Guide

CCS Technical Documentation Troubleshooting — RF
RH-17
Issue 1 04/2003 Nokia Corporation Confidential Page 57
To read tuning values from the phone
Open the Batch Tune dialog box, as shown below. To read the tuning values from the
phone, click the Read All button under the Phone heading. However, in order for the
tuning values to be displayed, you must first load the template file by clicking the Load
File button under the Parameter File field. Ensure that the template file used is appropri-
ate for the software version in the phone.
To read RSSI and AGC PDM values from the phone
Open the AGC Status dialog box, which follows. Click Enable Trace. RSSI is the value near
the antenna on the receiver side. The AGC PDM values are shown beside their respective
variable gain amplifier in the block diagram. The TX AGC PDMs are, as shown in the fol-
lowing diagram from right to left, IF_AGC, RF_AGC, PA_AGC.