User Guide

RH-17
Troubleshooting — RF CCS Technical Documentation
Page 54 Nokia Corporation Confidential Issue 1 04/2003
Highlight "Rho" in the Functions field, and click Rho ON in the State field. Choose Cell in
the Band field. Under Radio Configurationm choose the desired configuration. C2K is an
abbreviation for IS2000. Click Execute.
To turn on the AMPS transmitter
Eventually, the method will be to use the RF Main Mode dialog box as shown above,
choosing AMPS in the Band field. However, at the moment there is a software problem
with this method, with the result that once the AMPS transmitter is turned on in this
manner, it does not respond correctly to AGC PDM adjustment.
As a temporary solution, the AMPS Control dialog box, shown below, can be used.
Select the desired channel and power level, click Transmitter ON, then click the Execute
button. The reason why this is a temporary solution is because in some instances, the
AFC and AGC are not disabled, with the results that the signal will not be stable in fre-