Nokia E65 User Guide 9255211 Issue 2
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-208 product is in compliance with the essential requirements and other relevant provisions of Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
Contents For your safety..............................................................................6 About your device......................................................................................6 Network services........................................................................................7 Enhancements, batteries, and chargers..............................................7 1. Get started.................................................................................
Contents Outbox.........................................................................................................40 Delivery reports........................................................................................40 Text message center settings..............................................................40 Text messages..........................................................................................40 Write and send text messages......................................................
Contents Video settings.....................................................................................74 Connection settings..........................................................................74 Proxy settings.....................................................................................74 Network settings...............................................................................74 Advanced network settings...........................................................74 Music player.....
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety The office applications support common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed or modified. Network services To use the phone you must have service from a wireless service provider. Many of the features require special network features.
1. Get started Note: Your service provider may have requested that certain features be disabled or not activated in your device. If so, they do not appear on your device menu. Your device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information. Model number: Nokia E65-1. Hereinafter referred to as Nokia E65.
Get started 5. Replace the back cover. Instead of a SIM card, you may also have a USIM card, which is an enhanced version of the SIM card and is supported by UMTS (network service) mobile phones. Contact your service provider for more information. Insert the memory card Use only compatible microSD cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device.
Get started 2. Connect the power cord to the device. If the battery is completely discharged, it may take a while before the charging indicator starts scrolling. 3. When the battery is fully charged, disconnect the charger from the device, then from the wall outlet. Switch on your device 1. Press and hold the power key. 2. If the device asks for a PIN code (or UPIN code, if you have a USIM card), lock code or security code, enter the code, and select OK. 3.
Get started Keys and parts 1 — Power key. Press the power key briefly to switch between profiles. Press and hold the key to switch the device on and off. 2 — Light sensor 3 — Display 4 — Right selection key. Press the right selection key to perform the function shown above it on the display. 5 — Contacts key. Press the contacts key to access Contacts from any application. 6 — Mute key. Press the mute key to turn the microphone off during an active call.
Get started 2 — Voice key. Press the voice key to open Recorder. Press and hold the voice key to use voice commands. See "Voice commands," p. 30. 3 — Edit key. Press the edit key to open a list of commands for text editing. 4 — Volume keys. To adjust the volume, press the volume keys. To find the type label, remove the battery cover and the battery. Lock the keys When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.
Get started Volume control Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To adjust the volume during a call, press the volume keys. To adjust the volume when using the loudspeaker, press the volume keys. About the display A small number of missing, discolored, or bright dots may appear on the screen. This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off.
Get started Your device is connected to a PC with a USB data cable. A data call is active. and Indicate the phone line that you have selected, if you have subscribed to two phone lines (network service). All calls are forwarded to another number. A headset is connected to the device. The connection to a headset with Bluetooth connectivity has been lost. A hands-free car kit is connected to the device. A loopset is connected to the device. Text phone is connected to the device.
2. Basic information about your device Menu key and scroll key To access the applications in your device, press the Menu key in the standby modes. To return to Menu from an application, leaving the application open in the background, press the Menu key. Press and hold the Menu key to see a list of the active applications and switch between them. Leaving applications running in the background increases the demand on battery power and reduces the battery life.
Basic information about your device To change these shortcuts, select Menu > Tools > Settings > Phone > Standby mode. Menu The Menu is a starting point from which you can open all applications in the device or on a memory card. The Menu contains applications and folders, which are groups of similar applications. Use the scroll key to scroll up and down on the screen. Applications that you install are saved in the Installat. folder by default.
Basic information about your device and indicate the selected case. indicates that the first letter of the sentence is written in uppercase and all the other letters will automatically be written in lowercase. indicates number mode. • Press a number key 1–9 repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key. • To insert a number, press and hold the number key. • To switch between letter and number mode, press and hold #.
Basic information about your device You can adjust and customize the ringing tones, alert tones, and other device tones for different events, environments, or caller groups. To customize a profile, scroll to the desired profile in the list, and select Options > Personalise. Define the following settings: • Ringing tone — Select a ringing tone from the list, or select Tone downloads to open a bookmark folder containing a list of bookmarks for downloading tones using the browser.
Basic information about your device Transfer content between devices You can transfer content, such as contacts, from a compatible Nokia device to your Nokia E65 using Bluetooth connectivity or infrared. The type of content that can be transferred depends on the phone model. If the other device supports synchronization, you can also synchronize data between the other device and your Nokia E65.
Basic information about your device media for software applications, pictures, music, contacts, text, or any other form of electronic data. High-capacity memory cards are available. Memory details Select Menu, and Options > Memory details and Phone memory or Memory card. You can see how much memory is currently in use, how much free memory remains, and how much memory is consumed by each data type.
Basic information about your device Unlock a memory card To open a locked memory card, select Options > Unlock memory card. Enter the password. Download! Select Menu > Download!. With Download! (network service), you can browse, download, and install items, such as latest applications and related documents, to your device from the web. The items are categorized under catalogs and folders provided by Nokia or independent service providers.
3. Telephone When the device is locked, calls may be possible to the official emergency number programmed into your device. To make and receive calls, the device must be switched on, the device must have a valid SIM card installed, and you must be located in a service area of the cellular network. The GPRS connection is put on hold during voice calls unless the network supports dual transfer mode or you have a USIM card and are within the coverage of a UMTS network.
Telephone Make a conference call to the default conference service number To make a conference call to the default conference service number, you must first set the default number. Select Menu > Tools > Settings > Conf. call > Service number. Define a conference call number and, if needed, a conference call ID and PIN. If you have previously defined a default conference group, you must also set the default conference service number as the default conference in use. Select Menu > Tools > Settings > Conf.
Telephone 4. A list of the selected participants opens. To call a participant, scroll to it and press the conference key. 5. After the call has been answered, select Add to conf. to join the participant in the conference call. To drop the participant from the call, select Drop. 6. Repeat steps 3 and 4 until all the participants have been called. 7. After the final participant has answered your call, press the conference key. All the calls are merged into a conference call. 8.
Telephone Drop participant — Drop a party from the active call. End active call — End the currently active call. Menu — View the applications menu of your device. Hold — Place the active call on hold. Unhold — Remove the active call from hold. New call — Place a new call while on a call, if conference calling (network service) is available. Answer — Answer an incoming call while on a call, if Call waiting is activated. Reject — Reject an incoming call while on a call, if Call waiting is activated.
Telephone Change the barring password To change the password used for barring voice, fax, and data calls, select Menu > Tools > Settings > Call barring > Cellular call barring > Options > Edit barrings passw.. Enter the current code, then the new code twice. The barring password must be four digits long. For details, contact your service provider. Send DTMF tones You can send dual tone multi-frequency (DTMF) tones during an active call to control your voice mailbox or other automated phone services.
Telephone 3. Select Back until you return to the Connection menu. Second: define a net call profile 1. Select Internet tel. settings > Options > New profile. Enter a name for the profile, and select the SIP profile you just created. 2. Select Back until you return to the main menu. Third: select a preferred net call profile (optional) If you select a preferred net call profile, Internet tel. automatically uses this network profile to connect to the net call service. 1. Select Menu > Connect.
Telephone To make a call from Log, select Menu > Log > Recent calls and Missed calls, Recvd. calls or Dialled nos., and scroll to the desired contact. Select Options > Call > Internet call. Service settings Select Menu > Connect. > Internet tel. > Options > Settings > Settings:. Select Login type to view or change the way Internet tel. connects to the net call service. Select from the following: • Automatic — Login automatically to the net call service.
Telephone Select Options, and select from the following options: • Activ. fixed dialling — Restrict calls from your device. To cancel the service, select Deact. fixed dialling. You need your PIN2 code to activate and deactivate fixed dialing or edit your fixed dialing contacts. Contact your service provider if you do not have the code. • New SIM contact — Add a phone number to the list of numbers to which calls are allowed. Enter the contact name and phone number.
4. Voice applications Your device has different voice applications. Recorder Select Menu > Media > Recorder. With Recorder, you can record up to 60 seconds of a voice memo, save the voice recording as a sound clip, and play the sound clip. Recorder supports the AMR format. To record a voice memo, select Options > Record sound clip. Select Pause to pause the recording and Record to resume recording . When you finish recording, select Stop. The sound clip is automatically saved.
Voice applications Voice command settings Select Options > Settings. To switch off the synthesizer that plays recognized voice commands in the selected device language, select Synthesiser > Off. To reset voice recognition learning when the main user of the device has changed, select Reset voice adapts.. Voice aid Select Menu > Tools > Voice aid. The voice aid application reads text on the screen, allowing you to use basic functions of your device without looking at the display.
Voice applications Remember to hold the device in front of you during a push to talk call so you can see the display. Speak towards the microphone, and do not cover the loudspeaker with your hands. Phone calls always take priority over push to talk. Before you can use push to talk, you must define the push to talk access point and push to talk settings. You may receive the settings in a special text message from the service provider that offers the push to talk service.
Voice applications To call a selected contact, select Options > Talk 1 to 1. To make a group call, select Options > Make PTT group call. To send the contact a request to call you, select Options > Send callback request. Create a channel A channel is like a chat room: you can call the channel to see if anyone is online. The channel call does not alert the other participants; the participants just join the channel and start speaking with each other.
5. Contacts Press the contacts key. Manage all of your contact information, such as phone numbers and addresses. Add a personal ringing tone, voice tag, or a thumbnail image to a contact. Send contact information to compatible devices or receive contact information as business cards from compatible devices, and add them to your own list of contacts. To add a contact, select Options > New contact. Enter the contact information, and select Done.
Contacts Select Options > SIM contacts > SIM directory to see the names and numbers stored on the SIM card. In SIM directory you can add, edit, or copy numbers to Contacts, and you can make calls. Select ringing tones for contacts Select a ringing tone for a contact or contact group. If the caller's phone number is sent with the call and your device recognizes the number, the ringing tone plays when the contact calls you.
6. Calendar Select Menu > Calendar. In Calendar, you can create and view scheduled events and appointments. You can also set alarms for calendar entries. You can synchronize your calendar data with a compatible computer using Nokia PC Suite. For information on synchronization, see the PC Suite guide. Create calendar entries You can create four types of calendar entries: • Meeting entries have a specific date and time. • Memo entries are related to the whole day but not to a specific time of the day.
Calendar To set the default calendar view, select Options > Settings > Default view > Month view , Week view, Day view, or To-do view. To view a specific date in the calendar view, select Options > Go to date. Enter the date, and select OK. Tip: To quickly move to the nearest date with a scheduled event, press #. In the Month view, you can view the entire month at one time. Each row shows one week of dates. The active month is displayed, and the active day is either today or the last day that was viewed.
7. Clock Select Menu > Office > Clock. To set an alarm, select Options > Set alarm. Enter the alarm time, and select OK. When an alarm is active, is shown. To turn off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze. If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls.
8. Messages Select Menu > Messag.. In Messag. (network service), you can send and receive text messages, multimedia messages, and email messages. You can also receive web service messages, cell broadcast messages, and special messages containing data, and send service commands. Before sending or receiving messages, you may need to do the following: • Insert a valid SIM card in the device and be located in a service area of the cellular network.
Messages The available options may vary. To delete a message or folder, scroll to it, and press the clear key. Draft messages Messages that you have created, but not yet sent, are stored in the Drafts folder. To view or edit a message, scroll to it, and press the scroll key. To send the message, select Options > Send. To delete a message, scroll to it, and press the clear key. Tip: To delete multiple messages, scroll to each message, and simultaneously press the edit key and scroll key.
Messages 2. Enter the text of the message. To use a template, select Options > Insert > Template. 3. Select Options > Send to send the message. Sending options for text messages To set sending options for the text message, select Options > Sending options. Define the following: • Msg. centre in use — Select a message center to send the message. • Character encoding — Select Reduced support to use automatic character conversion to another encoding system when available.
Messages Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. Before you can send or receive multimedia messages on your device, you must define the multimedia message settings. Your device may have recognized the SIM card provider and automatically configured the multimedia message settings. If not, contact your service provider. See "Multimedia message settings," p. 50.
Messages Receive and reply to multimedia messages Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. Before you can send or receive multimedia messages on your device, you must define the multimedia message settings. Your device may have recognized the SIM card provider and automatically configured the multimedia message settings. If not, contact your service provider.
Messages Follow the instructions from your remote mailbox and Internet service providers. Contact your network and Internet service providers or operator for the correct settings. Set up your e-mail with the mailbox guide If you select Mailbox in the messaging main view and have not set up your e-mail account, you are prompted to do so. To start setting up the e-mail account with the mailbox guide, select Yes. 1. To start entering the e-mail settings, select Start. 2.
Messages Tip: To subscribe to other folders in your remote mailbox, select E-mail settings > Retrieval settings > Folder subscriptions. E-mail in all subscribed folders is updated when you retrieve e-mail from your remote mailbox. Read and reply to e-mail Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. To read a received e-mail, scroll to the e-mail, and press the scroll key.
Messages Instant messaging Select Menu > Connect. > IM. Instant messaging (IM) (network service) allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to after you register to an IM service. Service providers may differ in their support of features. If IM is not available from your wireless service provider, it may not appear in the menu of your device.
Messages To join an IM group or to continue a group conversation, scroll to the group, and press the scroll key. Enter a message, and press the call key to send it. To join an IM group that is not on the list, but for which you know the group ID, select Options > Join new group. To leave the IM group, select Options > Leave IM group.
Messages • Enter user ID — Enter the ID of the IM user. To allow a banned user to join the group, select Options > Remove. IM contacts When login to an IM service is complete, your contact list for the service provider is retrieved automatically. If your contact list is not available, wait a few minutes and try to retrieve your contacts list manually. Tip: The online status of your IM contacts is shown by an indicator next to the contact name.
Messages • Allow messages from — Select to receive instant messages from all other IM users, your IM contacts only, or not to receive messages at all. • Allow invitations from — Select to receive invitations to IM groups from all IM users, your IM contacts only, or not to receive invitations at all. • Msg. scrolling speed — To decrease or increase the speed at which new messages are displayed, scroll left or right.
Messages Message settings Fill in all fields marked with Must be defined or with a red asterisk (*). Your device may recognize the SIM card provider and automatically configure the correct text message, multimedia message, and GPRS settings. If not, contact your service provider for the correct settings, order the settings from your service provider in a configuration message, or use the Settings wizard application. Text message settings Select Options > Settings > Text message.
Messages • Access point in use — Select the Internet access point that the device uses for retrieving the e-mail messages that you receive. • Mailbox name — Enter a name for the mailbox. • Mailbox type — Select the mailbox protocol that your remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings.
Messages • Topic detection — Select On to display new topics in the cell broadcast topics list. Other settings Select Menu > Messag. > Options > Settings > Other. Select from the following: • Save sent messages — Select whether to store sent messages in the Sent folder. • No. of saved msgs. — Enter the number of sent messages that you want to save. When the limit is reached, the oldest message is deleted. • Memory in use — Select where to save your received messages.
9. Office Select Menu > Office. Some office applications may not be available in all languages. Opening a large file may not be possible or it may take a while. Nokia Team suite Select Menu > Office > Team suite. With Nokia Team Suite, you can create, edit, and delete teams, and send messages, view teams' web pages and communication history, and make phone calls to teams at one go. To create a new team, select Options > Team > Create new.
Office To use the Quickoffice applications, select Menu > Office > Quickoffice. A list of files in the .doc, .xsl, .ppt, and .txt file formats saved in your device memory or the memory card opens. To open a file in its respective application, press the scroll key. To sort files, select Options > Sort by. To open Quickword, Quicksheet, or Quickpoint, scroll to the desired tab with the scroll key. Quickword With Quickword, you can view Microsoft Word documents on the display of your device.
Office To send a file, scroll to the file, and Options > Send. To organize files or folders, scroll to the file or folder, and select Options > Move to folder. Default folders such as sound clips in gallery cannot be moved or deleted. Tip: To copy the file or folder to another folder, select Options > Copy to folder. To create a new folder to organize your files, select Options > New folder To receive a file using an infrared connection, select Options > Receive via infrared. Search for files 1.
Office Press # to add a decimal and * for + and - (for temperature), and E (exponent) symbols. Set base currency and exchange rate Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared. Before you can make currency conversions, you must choose a base currency and add exchange rates. The rate of the base currency is always 1. The base currency determines the conversion rates of the other currencies. 1.
10. Connectivity Your device offers several options to connect to the Internet, a corporate intranet, or to another device or PC. Your device supports a wired solution with a USB (Universal Serial Bus) cable connection for Nokia PC Suite. Your device also allows you to communicate using push to talk, instant messaging (chat), and modem-based connections. Internet access points An access point is where your device connects to a network.
Connectivity • Use login script — Select Yes, if your Internet service provider requires a login script, or if you want to automate your login. A login script is a sequence of instructions that the system follows during the login process. • Login script — Enter the login script. This setting is available only if you have selected Use login script > Yes. • Modem initialisation — Enter a command string for the connection setup, if required by your service provider.
Connectivity data cable, and select Data transfer when the device asks which mode is used. In this mode, your device acts as a mass storage device and you can see it as a removable hard drive in your computer. The device will switch into the Offline profile if this is selected. End the connection from the PC (for example, from an Unplug or Eject Hardware wizard in Windows) to avoid damaging the memory card.
Connectivity 4. When the connection has been established, Sending data is shown. The Sent folder in Messag. does not store messages sent using Bluetooth connectivity. If you have sent items using Bluetooth before, a list of the previous search results is displayed. To search for more Bluetooth devices, select More devices. To use a Bluetooth audio enhancement such as Bluetooth handsfree or headset you need to pair your device with the enhancement.
Connectivity SIM access profile When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the lock code to unlock it first.
Connectivity in packets is that the network is occupied only when sending or receiving data. As GPRS uses the network efficiently, it allows for quick data connection set-up and fast data transmission speeds. You must subscribe to the GPRS service. For availability and subscription to GPRS, contact your network operator or service provider. Enhanced GPRS (EGPRS) is similar to GPRS, but it enables faster connection.
Connectivity VPN policies define the method used by VPN client and a VPN gateway to authenticate each other, and the encryption algorithms that they use to help protect the confidentiality of data. Contact your corporation for a VPN policy. To use VPN with an application, the application must be associated with a VPN access point. A VPN access point is made up of an Internet access point and a VPN policy.
Connectivity Tip: You may receive the synchronization settings as a message from your service provider. Create a synchronization profile To create a profile, select Options > New sync profile and select from the following options: • Sync profile name — Enter a name for the profile. • Applications — Select the applications to synchronize with the profile. • Connection settings — Specify the needed connection settings. Contact your service provider for information.
Connectivity Define synchronization settings for Notes To define the synchronization settings for the Notes application, scroll to the desired profile, and select Options > Edit sync profile > Applications > Notes and select from the following options: • Include in sync — Select whether to synchronize your notes with this synchronization profile. • Remote database — Enter the path to the database with which you synchronize your notes.
11. Wireless local area network (WLAN) Some places, like France, have restrictions on the use of wireless LAN. Check with your local authorities for more information. This device can detect and connect to a wireless local area network (WLAN). To use wireless LAN, a network must be available in the location and your device must be connected to it. See wireless LAN availability Your device can show you whether wireless LAN is available.
Wireless local area network (WLAN) When Start Web browsing is selected, the WLAN wizard automatically creates an internet access point (IAP) for the selected wireless LAN. The IAP can also be used with other applications requiring wireless LAN connection. If you select a secured wireless LAN network, you are asked to enter the relevant passcodes. To connect to a hidden network, you must enter the correct hidden service set identifier (SSID).
12. Web Select Menu > Web (network service). Web is one of the two browsers in your device. With Web, you can browse regular Web sites. These pages use the extensible hypertext markup language (XHTML) or hypertext markup language (HTML). If you want to browse WAP pages, use Menu > Media > Services. Both of the browsers use their own bookmarks. The links in your received messages open in the Services browser.
Web Clear the cache A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To clear the cache, select Options > Advanced options > Clear cache. News feeds and blogs Select Menu > Web > Web feeds. Feeds usually contain headlines and articles, often about recent news or other topics.
13. Camera You can take photos or record video clips with the built-in camera. The camera lens is on the back of the device, and the display works as a viewfinder. The camera produces pictures in .jpeg format and video clips in .3gpp format. Take a picture 1. Select Menu > Media > Camera. Your device supports an image capture resolution of up to 1600 x 1200 pixels. 2. Use the display as a viewfinder, aim at your subject, and press the scroll key.
Camera • Video resolution — Select the resolution to use during video recording. The default setting for the resolution is always the lowest setting. • Default video name — Select Date or Text for the default title assigned to a recorded video. Date assigns the date of the recording as the title. Text assigns the term you define and a number to the recorded video. • Memory in use — Select the memory to use for storing recorded videos: Phone memory or Memory card. © 2007 Nokia. All rights reserved.
14. Media applications Select Menu > Media. Media contains different media applications that allow you to save and view images, record sounds, and play sound clips. Gallery Select Menu > Media > Gallery. Use Gallery to access and use different types of media, including images, videos, music, and sounds. All viewed images and videos and all received music and sounds are automatically saved to Gallery. You can browse, open, and create folders; and mark, copy, and move items to folders.
Media applications To move an image to another folder, select the image and Options > Organise > Move to folder. Scroll to the folder to which you want to move the image, and select Move. RealPlayer Select Menu > Media > RealPlayer. RealPlayer can play video clips and audio files that are stored in the device memory or on a memory card, transferred to your device from e-mail or compatible PC, or streamed to your device over the Web.
Media applications The available options may vary. View information about a media clip To view the properties of a video clip, audio file, or Web link, select the clip, and select Options > Clip details. Information may include the bit rate or the Internet link of a streaming file. Settings Select Menu > Media > RealPlayer > Options > Settings. Video settings Select Video > Loop > On, if you want to replay video clips automatically after they finish playing.
Media applications After you add or remove music files in the device, update your Music library. Select Options > Update Music library. The player searches the device memory for music files and updates them to the Music library. To select the previous or next track, scroll the scroll key up or down. To play the music tracks repeatedly, select Options > Loop. Select All to repeat all the tracks in the current folder, One to repeat the selected track, or Off to set off the repeating.
Media applications To switch between flash files saved on your device memory or memory card, scroll left or right. The available options may vary. © 2007 Nokia. All rights reserved.
15. Settings Select Menu > Tools > Settings. You can define and modify various settings of your device. Modifying these settings affects the operation of your device across several applications. Some settings may be preset for the device or sent to you in a configuration message by your network operator or service provider. You may not be able to change such settings. Scroll to the setting that you want to edit, and press the scroll key to do the following: • Switch between two values, such as on or off.
Settings • Message text — Enter the text that is sent when you cannot answer an incoming call and want to automatically send a text message as a reply. • Image in video call — Select Use selected to select a still image to be displayed instead of a video during a video call or None to not send any image during a video call. • Automatic redial — Select On to redial a number if it was busy at the first call attempt. Your device makes a maximum of 10 attempts to connect the call.
Settings • Packet data conn. — Select When available to register the device to the packet data network when you switch the device on in a supported network. Select When needed to establish a packet data connection only when an application or action requires it. • Access point — Enter the access point name provided by your service provider to use the device as a packet data modem to your computer. These settings affect all access points for packet data connections.
Settings • Port — Enter the port number of the registrar server. Data call settings Select Menu > Tools > Settings > Connection > Data call. To set the time-out period after which data calls automatically end if no data has been transferred, select Online time, and press the scroll key. Select User defined to enter the time yourself or Unlimited to keep the connection active until you select Options > Disconnect.
Settings • Authentication type — Select Open or Shared. • WEP key settings — Edit the settings for the WEP key. WEP key settings In the access point settings, select WLAN security mode > WEP. In an Ad-hoc network, all devices must use the same WEP key. Select WLAN security sett. > WEP key settings and from the following: • WEP encryption — Select the desired WEP encryption key length. • WEP key format — Select whether you want to enter the WEP key data in ASCII or Hexadecimal format.
Settings • • • • • • • • • • Time — Enter the time. Time zone — Enter the time zone. Date — Enter the date. Date format — Change how the date is displayed. Date separator — Change the symbol that separates days, months, and years. Time format — Select the 12-hour or 24-hour clock system. Time separator — Select the symbol that separates hours and minutes. Clock type — Select Analogue or Digital. Clock alarm tone — Select the tone that you want to use for the alarm clock.
16. Tools Select Menu > Tools. The Tools folder contains applications used to configure your device and to configure other applications. Memory card—See "Memory card," p. 20. Transfer—See "Transfer content between devices," p. 19. Profiles—See "Profiles," p. 17. Settings—See "Settings," p. 77. Positioning With the positioning service you can receive information from service providers about local issues such as weather or traffic conditions, based on the location of your device (network service).
Tools Select Options, and from the following: • Save position — Save your current position as a location or landmark. • Satellite status — View the signal strength of the satellites that provide the positioning info necessary for navigation. • Saved locations — View the locations you have temporarily saved in your device to help in navigation. Trip distance view The trip meter calculates the travelled distance and time and your average and maximum traveling speeds.
Tools With each landmark, select Options and select from the following options: • Edit — Modify landmark information such as a name, category, address, latitude, longitude and altitude. • New landmark — Create a landmark directly into the category. Select Current position to make a network request for the latitude and longitude coordinates of your current location or Enter manually to fill in the necessary location information such as a name, category, address, latitude, longitude and altitude.
Tools If you are not able to use Sett. wizard, visit the Nokia phone settings Web site at www.nokia.com. Application manager Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java Verified™ testing. Select Menu > Installat. > App. mgr.. When you open the application manager, you see all the software packages that have been installed, with their name, version number, type, and size.
Tools • Read user data — Read your calendar entries, contacts, or any other personal data • Edit user data — Add personal data, such as entries to your address book. You can define how you will be prompted to confirm Java application access to device functions. Select one of the following values: • • • • Ask every time — Require the Java application to ask for your confirmation each time it uses the functionality.
Tools One of the following notes may appear: • • • • Certificate not trusted — You have not set any application to use the certificate. You may want to change the trust settings. Expired certificate — The period of validity has ended for the selected certificate. Certificate not valid yet — The period of validity has not yet begun for the selected certificate. Certificate corrupted — The certificate cannot be used. Contact the certificate issuer.
17. Device management Manage data and software on your device. Server profile settings Select Menu > Connect. > Dev. mgr.. To create a server profile, select Options > New server profile and select from the following options: Server name — Enter a name for the configuration server. Server ID — Enter the unique ID to identify the configuration server. Contact your service provider for correct settings.
18. Shortcuts Here are some of the available keyboard shortcuts in your device. Shortcuts can make the use of the applications more efficient. Some shortcuts are application-specific and they are not available for all applications. General shortcuts Power key Switch between profiles. Press and hold to switch your device on and off. Menu key Open the main menu screen for access to all applications. Press and hold to switch between open applications. End key Close applications.
Shortcuts 1 Rotate counterclockwise. * Switch between the full screen size and normal view. Music player 5 Pause a track. 4 Return to the beginning of the track. Press within two seconds after a song has started to go to the previous track. Press and hold to rewind. 6 Go to the next track. Press and hold to fast forward. 8 Stop a track. © 2007 Nokia. All rights reserved.
Battery information Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Additional safety information Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2,2 centimeters (7/8 inches) away from the body.
Additional safety information gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.
Index A modem 62 connections data call settings 57 GPRS settings 58 WLAN settings 67, 80 connectors 11 contact groups 34 contact information 34 contacts adding 34 copying information 34 default information 34 groups 34 opening 24 ringing tones 35 copying text 17 access points 57, 78 answering calls 22 application manager 86 applications common actions 16 installing 86 modifying installations 86 removing 86 viewing the installation log 86 attachments 43, 45 audio files 73 authority certificates 87 automati
Index I modem 62 month view in calendar multimedia messages attachments 43 creating 42 receiving 43 replying to 43 sending 42 settings 50 music player 74 IM 46 images add to contacts 72 set as wallpaper 72 zooming in or out 72 inbox 39 indicators 13 alarm 13 Bluetooth 13 infrared 13 missed calls 13 infrared 61 installing applications 86 battery 8 SIM card 8 instant messaging 46 Internet 68 access points 57 net call settings 78 settings 57 J Java applications K keys L N navigation 83 net calls 27,
Index voice 30 rejecting calls 22 remote configuration creating a profile 89 settings 89 remote synchronization 63 ringing tones 35 roaming settings 65 storage 20 switching device on and off Symbian applications 86 synchronizing 63 T text copying 17 predictive input 17 traditional input 16 writing 16 text messages managing messages in the SIM card 41 replying 41 sending 40 writing 40 text phone 82 themes 18 to-do list 36 to-do view in calendar 37 tools folder 83 track lists 75 traditional text input 16
