User Guide

PAMS
Technical Documentation
NHB–3
Service Software Instructions
Original 26/97
Page 9
Service Software Menu Structure, Main Menu
MAIN
1 Program Setup
2 Initialize Phone
3 Testing and Adjustment
4 ME Memory Functions
5 Repairing date
6 power–up Self–tests
7 SW and HW Versions
8 Phone Mode (Local/Normal)..:Normal
Q Quit
ME Memory Functions
1 ME Short Code Memory
2 User Settings and Values
3 Product Profile Settings
4 Write HW Version
5 IMEI Transfer
6 Set UI and SCM Factory Values
7 Set Factory Values
Testing and Adjustments
1 RF Controls
2 Adjustments
3 Call Simulation
4 Internal Audio Loop
5 External Audio Loop
6 Logic Controls
7 Run MCU Selftests
8 Set MCU Start–Up Self–tests
Program Setup
1 Load New Setup
2 Save Current Setup
Power–up Selftests
MCU Internal Test......................: OK
MCU RAM BUS Test.................: OK
MCU IMEI Test...........................: OK
MCU ROM BUS Test:................: OK
MCU ROM DATA Test...............: OK
MCU ASIC BUS Test.................: OK
MCU ASIC Timer & IRQX Test.: OK
MCU ASIC Timer & NMI Test....: OK
MCU Audio Codec Test.............: OK
MCU DSP Code Download.......: OK
MCU EEPROM Checksum Test: OK
DSP Tests.................................: OK
MCU SIM LOCK Checksum Test: OK
SW and HW Versions
MCU Internal SW Version.:
MCU External SW Version:
DSP Internal SW Version..: ROM5 (LY)
DSP External SW Version.:
ASIC Version.....................:
HW Version.......................:
Manufacture Month............: