User Guide

PAMS
Technical Documentation
NHB–3
Service Software Instructions
Original 26/97
Page 8
Starting
Start the phone by pressing the power on button of the handset. Switch PC
power on.
To start the program on diskette, proceed as follows:
1. insert the service software diskette
into drive A: of your PC
2. log into drive A:
type A: and press <Enter>
3. start NHB2SERV.BAT and type NHB2SERV
run the service software and press <Enter>
To start the program on hard disk (if installed), proceed as follows:
1. log into drive C: type C: and press <Enter>
2. start NHB2SERV.BAT and type NHB2SERV
run the service software and press <Enter>
Note: See installation instructions in Appendix I.
Note: For more information on PCLocals starting options, see Appendix II.
The service software version can be seen on the screen. Press <Enter>; the
phone begins to scan the PCS channel. If the phone cannot find the correct ref-
erence channel, press <Esc> to seeing the main menu.