User Guide

PAMS
Technical Documentation
NHB–3
Service Software Instructions
Original 26/97
Page 45
4.3 – Product Profile Settings
When product profile pettings selection is activated the product profile informa-
tion is read from EEPROM. If the information is not received within 2 seconds
an error message is shown and the ME memory functions menu is displayed.
Otherwise the product profile settings menu is displayed, where the user can
select needed features.
The menu items will be added when new features will be added to product pro-
file.
When <Esc> key is used in this menu, the program will ask are the values
saved to the EEPROM or not. If <Y> key is used, values are saved to the EE-
PROM and the ME memory functions menu is shown. If <N> key is used the
ME memory functions menu is shown and nothing is saved to the EEPROM. If
<Esc> key is used the product profile setting menu is shown and the values can
be changed. If any other key is used nothing happens.
4.4 – Write HW Version
HW version is four digits.