User Guide

PAMS
Technical Documentation
NHB–3
Service Software Instructions
Original 26/97
Page 43
4.2 – User Settings and Values
After this selection new window is shown:
After menu selection all needed user settings will be read from the ME. If a
reading error happens, an error message is shown and the ME memory func-
tions menu is displayed when any key is pressed.
When menu is exited with <Esc> key and if some user settings and values
have been read from ME or file to PC memory, the program behaves same way
as with short code window. If no settings and values have been read to PC
memory and <Esc> key is used, the previous menu is shown and no data is
written to the memory of ME.
<F2> Write to ME
The program asks if the user settings and values will be saved to the ME or
not. If <Y> key is used, all data is saved to the ME. If <N> or <Esc> key is used
the user settings and values menu will come to the screen. If any other key is
used, nothing happens.
Information window is shown during writing. The window tells how long time it
will approximately take to write values. When all values are sent and responses
received, waiting window is removed and user settings and values menu is
shown. The waiting state can be broken with <Esc> key. If writing to the ME is
broken, only part of the values in the ME may be changed.
<F3> Read from ME
When this selection is used, security code, lock code and wakeup message val-
ues from the memory of ME are read to PC if the user gives positive answer to
a confirmation question. Information window, which tells how long time it will
approximately take to read values will be shown. When all values are received,
waiting window is removed and user settings and values menu is shown. The
waiting state can be broken with <Esc> key. If <Esc> is used, all user data is
deleted in the PC memory and user settings and values menu is shown.