User Guide

PAMS
Technical Documentation
NHB–3
Service Software Instructions
Original 26/97
Page 34
3.2.8 – Battery Voltage Adjustment
This function needs 6 V battery voltage from external power supply. When the
function is activated the next window will be shown.
The operation is the same as in charge voltage calibration.
3.3 – Call Simulation
3.3.1 – TX Power Level
All power levels (0...15) can be selected. This updates same parameter as TX
power level in the RF controls menu. Note that test and base value can’t be se-
lected. If test or base value was in use when call simulation menu was se-
lected, power level is changed to the smallest value (15).