User Guide

PAMS
Technical Documentation
NHB–3
Service Software Instructions
Original 26/97
Page 17
– Internal audio loop:
• input (Start value = Int)
• output (Start value = Int)
• loop (Start value = Off)
– External audio loop:
• interface (Start value = HS)
– Logic controls
• Buzzer Volume (Start value = Off)
• LCD Test Display (Start value = 1)
Load function generates same kind of basic text window as save function and
asks setup file name. When the name has been give and <Enter> key has been
used the file is loaded and all previously told selections and parameters are re-
placed with the values taken from the file. This has same effect as command
line parameter –f.
Both save file and load file function has default name which is previously used
name. For instance if setup was saved to file CONF.CON and load function is
activated the default value is CONF.CON. If only ENTER key is pressed default
value is used. If <Esc> key is used the function will be interrupted. If invalid
DOS filename is used or there isn’t load file with given name error message will
come to the display.
If phone mode had Local value before setup file loading, the mode is changed
to Normal in the phone by special Normal mode message and all functions
caused by the change are done.
Every time when phone mode change message from Local to Normal is re-
ceived by MS it makes reset to the whole MS.