User Guide

PAMS
Technical Documentation
NHD–4NX
Quick Guide
Page 5
Original 11/97
Another way of activating Keyguard
With an empty display,
Press Menu, then
∗
Yet a third way to activate Keyguard
You can activate Keyguard a third way by pressing Menu 11. Your phone
will then be protected from any unwanted key presses.
Note: Keyguard cannot be activated when phone is connected to a car kit or an office handsfree kit.
To deactivate Keyguard
Press Menu, then
∗
To answer a call with Keyguard active
Press
SND
During the call, the keypad remains unlocked for normal operation.
Keyguard automatically reactivates after the call is completed.
When placing an emergency call with Keyguard active, the emergency
number is displayed only after you’ve keyed in all of the digits. After the
emergency call, Keyguard automatically becomes active again.
Note: When Keyguard is active, calls may be possible to the emergency number programmed into
your phone (e.g. 911 or other official emergency number). However, Emergency Key 9
will not operate.
Speed Dial
Speed Dial is a convenient feature, allowing you to make phone calls
quickly and easily. Your phone recalls the phone number from your
personal directory, displays it briefly, then dials it.
1) Enter memory location number (2 to 99)
2) Press
SND
Note: Memory location 9 only works when Emergency Key 9 is set to On.
When set to Off, the programmed emergency number overrides this
Speed Dial location.
One–Touch Dialing
This feature operates very much like Speed Dial, except it’s even easier to
use. If you plan on using this feature, you’ll need to store your most
frequently–dialed numbers in memory locations 2 through 8.
Once you have turned One–Touch Dialing on with Menu 3 3,
Press and hold the key (2 through 8 only) for a few seconds to
call the number in the corresponding memory location.
Note: When using the Speed Dial and One–Touch Dial features,
remember that the 1 and 9 keys are designated for your voice mailbox
and for attempting emergency calls (only if Emergency Key 9 is On).