User Guide

PAMS
Technical Documentation
NHD–4
NAM Programming Instructions
Page 9
Original 11/97
CDMA Field Test Displays
When the phone is in CDMA (digital) mode, the following information is
displayed. Note that in order to see the Test Parameter Names, you need
to be in Alpha mode by pressing the ABC key.
Display
Number
Test Parameter Name Description
1 CSST Cellular Software state
1 XXXXX CDMA Traffic Channel: number of active pilots, FER
CDMA Paging Channel: Pilot PN offset
1 RSSI CDMA: RSSI
1 CCCC CDMA: Paging Channel Number
1 RX CDMA: Rx instantaneous power
1 TX CDMA: Tx instantaneous powel
2 CS STATE CS State
2 PGCH Paging Channel Number
2 CURSO Currently active Service Option(Traffic Channel Onlyt)
2 FER Frame Error Rate (Traffic Channel Only)
3 THIS DISPLAY IS NOT USED
4 OWNNUMBER Mobile station MIN
4 ESN Mobile station ESN (i.e. 156–03145864)
4 SL Selected System( A for SemiAuto A,B for SemiAuto–B, H for Home Area,
AB – Automatic)
4 P Preferred System (’B’– for even HomeSID, ’A’ for Odd Home SID)
4 MD Mode (AN – Analog, DI– Digital, AD – Analog and Digitial)
5 PPCA Primary Channel A
5 SPCA Secondary Channel A
5 PPCB Primary Channel B
5 SPCB Secondary Channel B
5 LOCAL Local use
5 AOC Access Overload Class
6 SID Current SID
6 NID Current NID
6 HANDSFREE Handsfree Mode (YES, NO)
7 BASE_ID BASE_ID (System Parameters)
7 P_REV P_REV (Sync Channel Message)
7 MIN_P_REV MIN_P_REV (Sync Channel Message)
8 CS STATE CS State
8 MMDDYY Date from system time