User Guide

PAMS
Technical Documentation
NHD–4
NAM Programming Instructions
Page 8
Original 11/97
Default Common Parameter Settings
Parameter Default Setting Valid Values
Service Programming Code 000000 or random 000000 – 999999
Contact Service Provider
Security Code 12345
Lock Code 1234
Emergency Numbers 911, *911, empty.
SW Version Current MCUSW version
number (Read Only)
Serial Number (ESN) ESN of the phone (Read
Only)
Programmed Date Empty MMYY,
where MM=month, YY=year
Field Test Disabled Enabled/Disabled
Field Test Mode
The Field Test Mode is used to investigate how the phone and cellular
system interact. When this mode is activated, the phone displays
dynamically information regarding signal strength, battery charging status,
and cellular state. Use the  or
 keys to scroll through the test
displays. The index display (the number on the upper right–hand corner)
shows the display number for the current test display. Pressing the ABC
key shows the help texts (e.g. test parameter names, etc.), if any, for the
corresponding information on the test display.