User Guide

PAMS
Technical Documentation
WinTesla User Guide
NHD–4
Page 73
Original 11/97
User Data Transfer
This option allows you to transfer the selected user data from one phone
to another.
Note: The Warranty Information can not be unchecked and will always be
transferred. The information can on;y be transferred to a phone once. After that an error
dialog is displayed.
If a phone should need to be replaced at the point of return, this option will
read the selected information from the defective phone, allow the user to
change to a new (replacement) phone, and write the users data into the
replacement unit.
Steps involved
– With phone powered on, Connect defective unit and press
<Read Phone>.
– Disconnect defective unit.
– Connect replacements unit and power on.
– Press <Write Phone>.