User Guide

PAMS
Technical Documentation
WinTesla User Guide
NHD–4
Page 14
Original 11/97
Options
Language
This option allows you to change the language used in the WinTesla
application.
Current Password / New Password / Retype Password
Currently not available
User ID
Allows the user ID to be entered if the users name is setup in the
opt_id.val (validation) file.
M2BUS COM Port
This option allows you to select which communications port the phone is
to be connected. The change will take place immediately after pressing
OK.
Automatic Rescan
Automatic rescan is a mechanism to automatically check for a new phone;
the time between re–scans is user configurable. When a phone is
scanned and recognized, the corresponding phone interface and menu
are loaded, extending the main menu at the top of the screen and
displaying the phone type and description at the bottom of the screen.
The
Product|New (or Ctrl+R ) function can be used to rescan the phone
in–between automatic rescans or when automatic rescan has been
disabled. The automatic re–scan mechanism is disabled when the
Product|Open function is used to load a phone interface.
A tick in the check–box indicates that the automatic rescan option has
been enabled. Clicking on the check–box (making the check–box blank)
will disable the automatic re–scan option. The time between re–scans (in
seconds) is entered into the edit box.
Pressing the OK button will save any changes made. Pressing CANCEL
will discard any changes you may have made.