User Guide

PAMS
Technical Documentation
WinTesla User Guide
NHD–4
Page 12
Original 11/97
New (Ctrl+R)
The ‘New’ function (which can also be activated by pressing Ctrl+R ) is
used to scan for a phone when either the automatic rescan option is off or
the automatic rescan timer has not expired ( see
Configure|Options section
for automatic rescan ).
If the phone type is unrecognized or unsupported by the current WinTesla
system then a warning message will be displayed.
Open
The ‘Open’ function allows you to ‘force load’ a phone interface, even if
there is no phone connected to the system.
A dialog box will appear and list the supported phone types (see figure
above). To select a particular phone type to load; highlight the phone type
name and click on OK.
Clicking on CANCEL will stop the request and no new phone type will be
loaded.
Loading a phone interface will disable the automatic rescan function ( see
Configure|Options section for automatic rescan).
Close
This function will close the currently loaded phone type interface that had
been loaded using the
Product|Open function. You can not ‘Close’ a loaded
phone type interface if it was loaded by a rescan.