User Guide

PAMS
Technical Documentation
NHD–4
CAR Installation Guide
Page 7
Original 11/97
Product List
Product: Remarks: Code:
Mobile holder MBH–6
Compact HF holder (w/cradle adapter) PHF–1
Mounting plate (w/12 screws, 4 nuts, 4 wash.) MKE–1
Swivel mount (w/6 screws) HHS–1
HF microphone HFM–4
Cigarette lighter cable (CARK–10 only) LCP–2
Power cable (CARK–16 only) PCH–5
Cradle adapter MKE–4N
Cable holder CKH–1
Mounting Plate and Swivel (MKE–1 and HHS–1)
The mounting plate (MKE–1) and swivel mount (HHS–1) mounting
brackets are interchangeable. Either one can be used to mount the
PHF–1 or MBH–6.The MKE–1 mounts flat and HHS–1 swivels for
adjustable mounting angles. NOTE ! MKE–1 is not directly
interchangeable with the cradle adapter MKE–4N.
Compact HF Holder (PHF–1)
Compact HF holder (PHF–1) provides and controls the supply voltage and
charge current for the handportable. In addition, it controls the audio paths
to handsfree equipment, and provides external antenna connection
(mini–UHF).
Cigarette Lighter Cable (LCP–2, CARK–10 only)
The cigarette lighter cable connects to the compact HF holder (PHF–1) via
the 5.5 mm d.c. plug. The other connector in the cable is plugged to the
standard cigarette lighter jack of the vehicle. Supply voltage may vary
between 10,8 and 15.6 volts.
CAUTION !
Maximum supply voltage is 15.6 volts, minus (–) in the chassis of the
vehicle !
Overvoltage or wrong polarity may cause serious
damage to the car kit !