DISASSEMBLY INSTRUCTIONS 9611ARo Technical Documentation NHC–1/4 6–1–1 Copyright Nokia Mobile Phones Contents Disassembly Instructions 6–1–2
DISASSEMBLY INSTRUCTIONS 9611ARo NHC–1/4 6–1–2 Technical Documentation Copyright Nokia Mobile Phones Disassembly Instructions Remove the battery. NHC–1: Remove the antenna by unscrewing with the antenna extraction tool ART–3. Now remove four back cover screws and remove the back cover by lifting it away. Then remove four chassis screws.
DISASSEMBLY INSTRUCTIONS 9611ARo Technical Documentation NHC–1/4 6–1–3 Copyright Nokia Mobile Phones Remove the chassis by lifting. Turn around the chassis and open the display module a little. Open the display module connector by pressing both sides of connector and slide off the display module cable.
DISASSEMBLY INSTRUCTIONS 9611ARo NHC–1/4 6–1–4 Technical Documentation Copyright Nokia Mobile Phones Turn chassis again and remove four (NHC–1) or two (NHC–4) module screws. Remove the plastic shield and throw it away (it is disposable). Now you can separate the system module from the bottom shield by lifting it away.
DISASSEMBLY INSTRUCTIONS 9611ARo Technical Documentation NHC–1/4 6–1–5 Copyright Nokia Mobile Phones This service manual describes the Technophone NHC–3XB handportable Telephone for the North American Dual Mode TDMA system. The manual comprises technical descriptions together with service instructions.
