9–10 9611ARo Technical Documentation Copyright Nokia Mobile Phones D9/D25 RS–232 Adapter Product code: 4626170 Suitable adapter between DAU–2 and computers having 9 pin D connector as a serial port. Antenna Key ART–3 (not used with NHE–4, NHK–4, NHC–4 and NHB–2) Product code: 9580015 Antenna key ART–3 should be used when removing antenna from the phone.
9611ARo Technical Documentation 19–9 Copyright Nokia Mobile Phones Modular Cable XCM–1 Product code: 4626131 XCM–1 is a standard 1 meter long flat cable with male modular–8 connectors in both ends. In a complete service concept three pieces of the XCM–1 is needed. Modular T–Adapter Product code: 4626134 Modular T–adapter is suitable branching unit to provide the needed parallel modular connections.
9611ARo Technical Documentation 19–8 Copyright Nokia Mobile Phones Flash Prommer FPS–3 Product code: 0770017 FLASH prommer is used to update the main software of the phone, should that some day become necessary. Updating is done by first loading the new MCU software from PC to the FLASH prommer and then loading the new SW from prommer to the phone. When updating more than one phone in a row, the new MCU SW must be loaded to the prommer only in the beginning.
9611ARo Technical Documentation 19–7 Copyright Nokia Mobile Phones Service Box JBS–7 Product code: 0770015 Service box provides convenient test enviroment (regulated power supply, M2BUS, preset battery reference voltage, external RF connection, audio test loops, HOOK switch etc.) and mechanical interface in one box. When AUDIO switch of JBS–7 is INT position, the AF signals are routed normally to the modular–type system connectors.
9611ARo Technical Documentation 19–6 Copyright Nokia Mobile Phones Test Frame JBS–8 Product code: 0770014 JBS–8 is used when the service work must be done without covers in the phone. The phone’s radio module is placed into plastic frame, which provides the needed connections to the bottom– and battery connectors of the phone. RF connection is done by RF cable, which is as well included into the JBS–8. Suitable d.c. power supply regulation for JBS–8 concept is provided by example JBS–7.
19–5 9611ARo Technical Documentation Copyright Nokia Mobile Phones RF Adapter to Top Antenna Connector (not PCN) Product code: 0770011 AAS–3 provides a connection from top antenna connector to the measurement device. The accuracy of the connection is not as good as with bottom antenna connector. Battery Adapter BDS–2 Product code: 0770013 Battery adapter is used when the condition of the battery pack is to be tested with either internal discharging feature, or with external capacity meter.
9611ARo Technical Documentation 19–4 Copyright Nokia Mobile Phones Dummy Battery Pack BTS–4 Product code: 0770009 Dummy battery is convenient device when the battery reference voltage is to be programmed. JBS–7 has a voltage setting for supplying specified reference voltage needed for this programming. Of course the BTS can be used to substitute the normal battery also during normal testing, and optionally the input d.c. may be taken from some external power supply.
9611ARo Technical Documentation 19–3 Copyright Nokia Mobile Phones PC/MBUS Adapter DAU–2 Product code: 0750006 DAU–2 is connected between the phone and the serial (COM) port of the PC. It matches the M2BUS data bus signals to the serial data bus of the computer. SW Security Device ”Dongle” PKD–1 Product code: 0750018 SW security device ”Dongle” is a piece of hardware enabling the use of the PCLocals when connected to the parallel (LPT) port of the PC.
19–2 9611ARo Technical Documentation Copyright Nokia Mobile Phones Service Accessories Audio Cable ADS–1 Product code: 0730011 Audio cable is an adapter routing AF signals (MIC/EAR) from 8 pin modular connector to two BNC connectors. Power Connector PCS–1 Product code: 0730012 Suitable adapter between JBS–7 and the power supply.
9611ARo Technical Documentation 19–1 Copyright Nokia Mobile Phones Contents of Service Accessories Service Accessories Audio Cable ADS–1 Power Connector PCS–1 PC/MBUS Adapter DAU–2 SW Security Device ”Dongle” PKD–1 Dummy Battery Pack BTS–4 Service Cable SCS–1 RF Adapter to Top Antenna Connector (not PCN) Battery Adapter BDS–2 Test Frame JBS–8 Service Box JBS–7 Flash Prommer FPS–3 Modular Cable XCM–1 Modular T–Adapter D9/D25 RS–232 Adapter Antenna Key ART–3 19–2 19–2 19–2 19–3 19–3 19–4 19–4 19–5 19–5 1
