User Guide

INSTALLATION

INSTRUCTIONS

9617ARo

4–9

NHC–4

Technical Documentation

Mobile Holder (MBH–6) and Compact HF Holder (PHF–1) together

The holder unit MBH–6 offers firm attachment. It is usually attached to Compact

HF Holder PHF–1 with the Cradle Adapter Kit (MKE–4N), which includes the

cradle adapter, 4 screws and 4 nuts.To attach the MBH–6 to the PHF–1 first

you have to remove the lower cover of PHF–1 by detaching the four cross-

headed screws visible underneath the PHF–1 (Figures 1, 2). Insert the four pro-

vided nuts into the corresponding slots in the cradle adapter MKE–4N, and

slide the cradle adapter into its place underneath the MBH–6 (Figure 3). Do not

use mounting plate MKE–1 in place of cradle adapter MKE–4N. Mount MBH–6

to its slot in the front part of PHF–1, and finally attach it by using the provided

screws (Figures 4, 5). It is also possible to use the MBH–6 as a separate mo-

bile holder, it is then attached to the vehicle with MKE–1 or HHS–1.

FIG 1 FIG 2

FIG 3 FIG 4

FIG 5