User Guide

INSTALLATION

INSTRUCTIONS

9617ARo

4–6

NHC–4

Technical Documentation

Mounting Plate and Swivel (MKE–1 and HHS–1)

The mounting plate MKE–1 and swivel mount HHS–1 mounting brackets are

interchangeable. Either one can be used to mount both the MCH–8 or the

HFJ–3. The MKE–1 is a fixed position mount and HHS–1 is a swivel mount

which allows for adjustable mounting angles.

Mobile Holder (MBH–6)

The easiest way to attach the phone to the car is to use ”Light Car Kit” installa-

tion. The mobile holder MBH–6 is attached the car by using mounting plate

MKE–1 or swivel mount HHS–1.

Compact HF Holder (PHF–1)

Compact HF holder (PHF–1) provides and controls the supply voltage and

charge current for the handportable. In addition, it controls the audio paths to

handsfree equipment, and provides external antenna connection (mini–UHF).

Cigarette Lighter Cable (LCP–2, CARK–10 & CARK–21 only)

and Power Cable (PCN–5, CARK–16 only)

The cigarette lighter cable LCP–2 or the power cable PCN–5 connects to the

compact HF holder (PHF–1) via the 5.5 mm d.c. plug.

The other connector in the cable (LCP–2) is plugged to the standard cigarette

lighter jack of the vehicle.

The red (+12V) and black (GND) wires (PCN–5) connect to the battery via the

supplied fused connectors.

Supply voltage may vary between 10.8 and 15.6 volts.

WARNING!

–

MAXIMUM SUPPLY VOLTAGE IS 15.6 VOLTS, MINUS (–) IN THE CHASSIS OF THE

VOLTAGE!

– OVERVOLTAGE OR WRONG POLARITY MAY CAUSE SERIOUS DAMAGE TO THE

CAR KIT!