User Guide

PAMS
Technical Documentation
NHC–4
NAM Programming Instructions
Original 09/97
Page 5
PROGRAMMING THE SECURITY CODE:
12 From Main Level Menu use the key to select the ”Security” menu, press [Select] and
the current 5–digit security code will appear in the display. Default is 12345.
13 If you wish to change the Security code at this time, use the numeric keys to
change the value.
14 Press the softkey [OK] to store the changes.
PROGRAMMING EMERGENCY NUMBERS:
15 From Main Level Menu use the scroll key to select the ”Emergency” menu,
press softkey [Select] to enter the emergency numbers.
EMERGENCY NUMBER 1(911) EMERGENCY NUMBER 2(911) EMERGENCY NUMBER 3(None)
16 If you wish to change the display value, use the numeric keys to make
changes. Use the scroll key to select the emergency number you wish to
change and press [Select].
17 To save the value, press softkey [OK].
18 Press [Quit] to exit the menu.
SW VERSION:
19 From the Main Level Menu use the scroll key to display the ”SW version” menu,
press [Select] to view software version, date and product type.
20 Press [Quit] to exit the menu.
SERIAL NUMBER (ESN):
21 From the Main Level Menu, use the scroll key to display the ”Serial No.” or ESN
of the phone.
22 Press [Quit] to exit the menu.
PROGRAMMED: (DATE THE PHONE IS FIRST PROGRAMMED)
23 From the Main Level Menu, use the key to display the ”Programmed” menu.
24 Press [Select] and enter a four digit number that corresponds to the month and year
the phone is sold. Example: (mmyy) 0197=January 1997, 0996=September 1996.
NOTE: This menu location can be programmed only once. After the date has
been entered it can not be changed. Any attempt to enter the menu after it has
been programmed will receive a short beep and the message ”DATE ALREADY
STORED”.
EXITING NAM PROGRAMMING:
25 To exit the NAM programming mode, turn the phone off and leave it off for five
seconds.