User Guide

PAMS
Technical Documentation
NHC–4
NAM Programming Instructions
Original, 06/97
Page 4
ACCESS NAM PROGRAMMING MODE
1 Turn the phone on.
2 Enter the NAM access code. Factory default is: *3001#12345
3 Enter softkey [Menu]
4 If this screen appears
Field test
NAM 1
NAM 2

you have entered the access code correctly.
SELECTION FROM THE MAIN LEVEL MENU (FIRST LEVEL OF NAM MENU):
5 Press the scroll key up or down repeatedly until the desired main menu selec-
tion is displayed. Select from:
NAM1 NAM2 NAM3 Security Code Emergency Number SW version
Serial No. Programmed Field Test
6 Press softkey [Select] to access the second level menu for your main menu
selection.
PROGRAMMING NAM’S 1 THROUGH 3 (SECOND LEVEL NAM MENU):
7 Press the key up or down to scroll through the selected NAM information list.
Select from:
HOME SYSTEM OWN NUMBER PSID/RSID LISTS CHANGE DEFAULTS
”CHANGE DEFAULTS”
NAM STATUS ACCESS METHOD LOCAL OPTION PRIMARY PAGING CH
SECONDARY PAGING CH DCCH CCH A DCCH A NBR DCCH CCH B
DCCH B NBR OVERLOAD CLASS GROUP ID ROAMING STATUS
A–KEY
8 If the value is incorrect, press softkey [Select] and use the numeric keypad or
key to make any needed changes.
9 Enter softkey [OK] to save the value.
10 Repeat steps 7 through 9 for the remaining NAM info items to be viewed and/or
changed.
11 To program other NAMs, press [Quit] to return to the Main Level Menu list. Se-
lect NAM 2 or NAM 3 and enable it in the NAM STATUS menu in the CHANGE
DEFAULTS Menu.