User Guide

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated

with care. The suggestions below will help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity and all types of liquids or

moisture can contain minerals that will corrode electronic circuits. If your

device does get wet, remove the battery and allow the device to dry

completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic

circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device.

• Do not paint the device. Paint can clog the moving parts and prevent

proper operation.

• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity

sensor, and light sensor lenses).

• Use only the supplied or an approved replacement antenna. Unauthorized

antennas, modifications, or attachments could damage the device and may

violate regulations governing radio devices.

• Use chargers indoors.

• Always create a backup of data you want to keep, such as contacts and

calendar notes, before sending your device to a service facility.

All of the above suggestions apply equally to your device, battery, charger, or

any enhancement. If any device is not working properly, take it to the nearest

authorized service facility for service.