User Guide

Settings
44
Display brightness
You can change the brightness of your phone display.
1. In the standby mode, select Menu > Settings > Display settings > Display
brightness.
2. Scroll up or down to adjust the brightness level to your preference.
3. Select OK to accept your settings.
Backlight timeout
Backlight timeout sets the delay time before the display backlight is switched off.
In the standby mode, select Menu > Settings > Display settings > Backlight
timeout , and select a delay.
■ Tone settings
From this menu, you can adjust the ringing volume, keypad tones, and other tone
settings for the active profile. See "Customize a profile," p. 38, for more
information on profile settings.
Select Menu > Settings > Tone settings and one of the following options:
Incoming call alert—Select how the device notifies you of an incoming call.
Ringing tone—Select the ringing tone for incoming calls.
Ringing volume—Set the volume of your ringing tone.
Vibrating alert—Turn the vibrating alert On or Off.
Message alert tone—Select the tone for received messages.
Keypad tones—Set the volume of your keypad tones (or turn them off).
Warning tones—Turn warning and confirmation tones On or Off.
Alert for—Define which caller groups the selected profile will accept or decline.
■ Enhancement settings
The enhancement settings menu is shown only if the phone is or has been
connected to a compatible enhancement.
In the standby mode, select Menu > Settings > Enhancement settings > Charger.