Nokia Customer Care 2118 (RH-77) Mobile Terminal Service Tools Issue 01 04/2005 Company Confidential ©2005 Nokia Corporation
118 (RH-77) Service Tools Nokia Customer Care Contents Page Model 2118 Service Tools ............................................................................................................................ 3 AAS-10A RF Probe ...................................................................................................................................... 3 CA-22DS Flash Cable .........................................................................................................................
2118 (RH-77) Service Tools Nokia Customer Care Model 2118 Service Tools AAS-10A RF Probe The AAS-10A allows you to troubleshoot the handset. You can use the probe with the XRS-6 RF Cable. CA-22DS Flash Cable The CA-22DS allows bottom connector flashing using the FLS-4S Flash Adapter or the FLC-20 Flash Device. CA-25RS RF Test Cable The CA-25RS test cable is used for RF engine testing and tuning.
2118 (RH-77) Service Tools Nokia Customer Care DAU-9S FBUS/MBUS Cable The DAU-9S is a general purpose cable that supports FBUS/MBUS communication between a Mod-10 device and a PC. DAU-9T FBUS Cable The DAU-9T provides a connection from the serial port of the computer to the Pop-portTM connector of the mobile terminal. DKU-5F Flash Cable The DKU-5F is a single-cable flashing solution for CDMA handsets that include Pop-portTM connectors. This cable supports Diego, Phoenix, and UPST service tools.
2118 (RH-77) Service Tools Nokia Customer Care FLS-4S Flashing Device The FLS-4S allows Point of Sale (POS) locations to flash the handset and power the FLA-44 Flash-loading Adapter. The FLS-4S works with the XCS-1 Service Cable (not included). FPS-8 Flash Prommer The FPS-8 is used for mobile terminal flashing at authorized service centers. JBV-1 Docking Station The JBV-1 connects flash prommers. The docking station can be powered by the FPS-8 Flash Prommer or by an external power supply.
2118 (RH-77) Service Tools Nokia Customer Care MJ-42 Module Test Jig The MJ-42 allows PWB-level service and troubleshooting for authorized service centers. It supports regulated and unregulated DC input voltages and includes Local and Normal Mode operations, a headset jack for audio tests, a RUIM card reader, and a second DC input for VCHAR used in EM tuning. The MJ-42 also supports simultaneous RF connections to the CDMA engine. A completely functional UI module is provided on the right side.
2118 (RH-77) Service Tools Nokia Customer Care PKD-1 Software Security Dongle The PKD-1 is a hardware dongle that, when connected to the parallel (LPT) port of the PC, enables the use of the service software. It is not possible to use the service software without the dongle. Printers or other peripheral devices can be connected to the PC through the dongle, if needed. Caution: Make sure that you have switched off the PC and the printer before making connections.
2118 (RH-77) Service Tools Nokia Customer Care SS-13 Tuning Docking Station The SS-13 is used with the MJF-x/DA-x Docking Station Adapters (shown with MJF-17) for CDMA RF autotuning. XCS-4 MBUS/FBUS Cable The XCS-4 is a general purpose cable for flashing and communicating with the mobile terminal. It is used to connect the FPS-8 Flash Prommer to the docking station adapter or the service jig.
2118 (RH-77) Service Tools Nokia Customer Care Flashing, Testing, and Tuning Use the following setups with either manual or automatic tuning with the Phoenix Service Software.
2118 (RH-77) Service Tools Nokia Customer Care Service Configuration 2: Flash Programming Using Docking Station 1 5 3 4 2 Page 10 Item Name Type Code 1 Flash prommer box (sales pack) Included in FPS-8 sales pack: Service cable Serial cable Power supply FPS-8 0080321 CA-10DS AXS-4 ACF-8 0730298 0730090 0680032 2 Docking station JBV-1 0770298 3 Docking adapter MJF-17 0774282 4 DC power cable PCS-1 0730012 5 Modular cable XCS-4 0730178 Software protection key (not shown) PKD-1
2118 (RH-77) Service Tools Nokia Customer Care Service Configuration 3: Covers-Off Troubleshooting Using Service Jig 5 2 1 4 3 Item Name Type Code 1 Module repair jig (includes RF test cable) MJ-42 CA-25RS 0780317 0730316 2 DC power cable PCS-1 0730012 3 RF test cable XRS-6 0730231 4 Service MBUS/FBUS cable DAU-9S 0730108 5 Software protection key PKD-1 0750018 Service software (not shown) Phoenix 8407840 Issue 01 04/2005 ©2005 Nokia Corporation Company Confidential Page
2118 (RH-77) Service Tools Nokia Customer Care Service Configuration 4: Automated Tuning and Alignment This setup is used for tuning of the handset at Nokia Authorized Service Centers.
