Nokia Customer Care 2118 (RH-77) Mobile Terminal Disassembly/Assembly Issue 01 04/2005 Company Confidential ©2005 Nokia Corporation
118 (RH-77) Disassembly/Assembly Nokia Customer Care Table of Contents Page Safety Information ......................................................................................................................................... 3 ESD Protection ............................................................................................................................................. 3 Assembly Instructions ...........................................................................................
Nokia Customer Care 2118 (RH-77) Disassembly/Assembly Safety Information Adhere to the following guidelines when assembling and disassembling the mobile terminal. • QUALIFIED SERVICE Only qualified personnel may install or repair mobile terminal equipment. • ACCESSORIES AND BATTERIES Use only approved accessories and batteries. Do not connect incompatible products. • CONNECTING TO OTHER DEVICES When connecting to any other device, read its user’s guide for detailed safety instructions.
2118 (RH-77) Disassembly/Assembly Nokia Customer Care Assembly Instructions To assemble the mobile terminal, follow the "Disassembly Instructions" in reverse order. Disassembly Instructions Use the following instructions to disassemble the mobile terminal. 1. Remove the B-cover Press the release button, and slide the B-cover downward. Release button 2. Remove the A-cover and Keymat A. Use a screwdriver or SRT-6 to unhook the A-cover clasps from the bottom of the C-cover.
2118 (RH-77) Disassembly/Assembly Nokia Customer Care B. Unhook the clasp on the side of the assembly to release the A-cover and keymat. 3. Remove the Screws Use a screwdriver to remove the six screws from the C-cover assembly. 3 5 1 2 6 4 Note: During assembly, use the reverse order and use a Torx T6 PLUS with a torque of 20 Ncm.
2118 (RH-77) Disassembly/Assembly Nokia Customer Care 4. Remove the PWB Module Apply outward pressure on the C-cover, and remove the PWB module from the C-cover assembly. 5. Remove the UI Display Carefully unlatch the UI module clasp, and separate the UI display from the BB module. 6. Remove the RUIM Label Unattach the RUIM label from the C-cover assembly.
Nokia Customer Care 2118 (RH-77) Disassembly/Assembly 7. Remove the PWB Shied Apply outward pressure to the side of the C-cover while pushing up on the PWB shield to remove it from the assembly. 8. Remove the PIFA Antenna Wedge the SRT-6 between the C-cover and the PIFA antenna, and apply upward pressure to remove it.
2118 (RH-77) Disassembly/Assembly Nokia Customer Care 9.
