Cell Phone User Guide

Settings
50
■ Phone settings
Phone language
1. In the standby mode, select Menu > Settings > Phone settings > Phone language.
2. Select the language of your choice.
The language setting may affect the time and date formats of the clock, alarm
clock, and calendar.
Automatic keyguard
You can set the keypad of your device to lock automatically after a preset time delay.
1. In the standby mode, select Menu > Settings > Phone settings > Automatic
keyguard > On or Off.
2. If you select On, Set delay: is displayed.
3. Enter the delay time (in minutes and seconds), and select OK.
When keyguard is on, it may be possible to dial the emergency number programmed
into your device.
Touch tones
Touch tones are the tones that sound when you press the keys on your device
keypad. You can use touch tones for many automated dial-up services such as
banking and airlines or for entering your voice mailbox number and password.
Touch tones are sent during an active call. You can send them manually from
your device keypad, or send them automatically by saving them in your device.
Set type
1. In the standby mode, select Menu > Settings > Phone settings > Touch
tones > Manual Touch tones.
2. Select one of the following options:
Continuous—The tone sounds for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the Touch tone
length option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can also specify touch tone length when using the Fixed option.
In the standby mode, select Menu > Settings > Phone settings > Touch tones >
Touch tone length > Short (0.1 second) or Long (0.5 second).