User Guide

Nokia Customer Care RF Description and Troubleshooting

2115i/2116/2116i (RH-66)

Phoenix Setup

Use the following steps to configure Phoenix for RF troubleshooting.

1. Connect RF test connector to a call box.

2. Connect the mobile terminal to a PC via the bottom connector, and connect a

power supply.

3. Open the Troubleshooting menu, and click Phone Control.

The Phone Control dialog box appears.

4. On the Phone Control dialog box, click the LOCAL button in the Phone State

area to put the mobile terminal into Local Mode.

Figure 3: Phone Control dialog box

5. Use Table 1, “Phoenix Configuration,” on page 6 to continue Phoenix

configuration based on the band type.