User Guide

Nokia Customer Care RF Description and Troubleshooting

2115i/2116/2116i (RH-66)

GPS RF General Testing

In radiated testing the CW level has to be higher because of the attenuation in

pad + cable + coupler. With a -20 dB pad, the signal level in the signal generator is

~ -110 dBm + cable attenuation + 20 dB + 18 dB. The CW analysis allows end-to-end

spectral purity to be assessed during manufacturing and development.

1. On the Phone Control dialog box, click the LOCAL button in the Phone State

area to put the mobile terminal into Local Mode.

Figure 35: Phone Control dialog box

2. Inject a -110 dBm tone at 1575.52 MHz at the GPS connector (X6250) with a

signal generator or a call box.

Figure 36: GPS antenna port

CW tone