User Guide

Nokia Customer Care RF Description and Troubleshooting

2115i/2116/2116i (RH-66)

Figure 31 shows the Rx VHF LO test points.

Figure 31: Rx VHF LO test points

Table 12 gives the description and values for the test points as shown in Figure 31.

Tx UHF LO

There are two fixed LOs: 3296.16~3395.88 MHz for Cell band and 3700~3819.90 MHz

for PCS band. This is the first LO for up-conversion. Monitor the control voltage at

C7014. At this control voltage, the N7000 LO is locked and should be between 1.2 and

1.8 VDC.

Table 12: Rx VHF LO Test Points

Test

Point

Description Value

1 RX LO lock voltage 1.2 to 1.7 VDC

2VR7 2.8V

3VR5 2.8V