User Guide

Nokia Customer Care RF Description and Troubleshooting

2115i/2116/2116i (RH-66)

2. Open the RF PDM dialog box component in RF.

Figure 22: RF PDM dialog box for AFC measurement

Typical voltages observed are as follows:

• AFC PDM[0] = 1.3 V

• AFC PDM[-1024] = 0.8 V

• AFC PDM[1023] = 2.5 V

VCTCXO Manual Tuning

You can manually tune the VCTCXO to verify when a mobile terminal is tuned incorrectly

or if the mobile terminal cannot make a call. To verify, monitor the RF signal at the

output of the mobile terminal.