User Guide

2115i/2116/2116i (RH-66)

Service Software Instructions

4. Select the FLS Virtual port setting.

Figure 5: Serial Port tab on the Settings dialog box

5. Click OK.

6. You can now proceed with the normal initiation of a session to scan for the

product.

Scanning for a Product

Many Diego features are product-specific, so at the beginning of a session you must

configure Diego for the product on which you are working. You can scan for a product

either automatically (default) or manually.

• In automatic scan mode, Diego scans for the product every 5 seconds (a rate

which you can customize in the setup menu) and selects the necessary

configurations.

• To manually scan, open the Settings dialog box, click the General tab, and click

Connect.

Using Components

Diego tasks are managed by specific software components. Use the main menu to select

the component you want to use. When the new component window is opened, Diego

also opens an associated toolbar and adds component-specific 1items to the menu.