Smart Node B2/B14 or B66 (SN4IBN) Quick Start Guide
Smart Node Quick Start Guide Table of Contents: Welcome ...................................................................................................................... 3 Box Content ................................................................................................................. 4 Connection Overview .................................................................................................... 5 Quick Setup.......................................................................
Smart Node Quick Start Guide Welcome The Smart Node 4G provides Inside this packaging you will find enhanced mobile voice and data service within buildings. It delivers the Smart Node and its accessories necessary for the installation. The high quality voice calls and faster, Smart Node has zero touch set-up more reliable mobile data service. process.
Smart Node Quick Start Guide Box Content Quick Start Guide Smart Node 4G Module B2-B14 or B66 SN4IBN (This document) Back Haul Module Wall Mounting Kit (1 Bracket, 3 Screws, and 3 Wall Anchors) (assembled with the 4G Module AC Power Adaptor Ethernet Cable 4 GPS Antenna
Smart Node Quick Start Guide Connection Overview All Smart Node Variants Power Power on when AC Adaptor is plugged in. Yellow WAN Port Connect to internet router. Grey LAN Port Connect to other devices, like PC, if needed. GPS Port Connect the external GPS antenna if needed. Reset 1. Press and hold for 5 seconds for reboot. 2. Press and hold for 20 seconds for factory setting reset and software update.
Smart Node 3 Quick Start Guide Let your Smart Node After you power on your Smart Node, it will go through self- installation. It can take up to 45 minutes to complete the device setup. Your Smart Node may download updates and restart during this time. • Power (Solid White) Power on. Device self-testing and update complete. • Internet (Solid White) Successful internet connection. • Status (Solid White) Successful connection established with mobile operator network.
Smart Node Quick Start Guide • Device is ready to provide 4G service for Carrier 2. 4 Flexible mount options are available for the Smart Node • Wall mounting (accessories included in the box) • Ceiling mounting (accessories included in the box) • Desk stand (not included in the box, Optional accessory) Mount the Smart Unit as needed.
Smart Node Quick Start Guide Congratulations! Your Smart Node setup is complete. You should see improved signal strength from your device. Make your first call to enjoy more dependable voice calls and more reliable high- speed data connection.
Smart Node Quick Start Guide Common Troubleshooting Procedures Issue Description and Resolution Device has a hardware issue. Power Solid Orange Internet Solid Orange Status GPS Solid Orange Solid Orange 4G CH1 4G CH2 Solid Solid Orange Orange/O ff Tamper Detected Product has a temper alarm.
Smart Node Quick Start Guide FAQs then you will no longer be able to place calls through the Smart Node. However, if you have coverage from the mobile network of your mobile service provider you can still place calls normally. How do I know that I am using my Smart Node service? Your mobile phone display will automatically indicate if you are within small cell signal range.
Smart Node Quick Start Guide NOTICE OF LIABILITY: Every effort has been made to ensure that this guide contains accurate and current information. However, Nokia and the author shall not be liable for any loss or damage suffered by readers as a result of any -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
